Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

AKRISTOP

Concentrated moisture-insulating primer for mineral surfaces
For interior use
The product can be applied by roller
The product can be applied by brush
Use water for diluting and tools cleaning
Drying time 1 h
Packaging 1 l, 5 l
Product can be stored only at temperatures above 5 ºC
Consumption 4 - 10 m²/l
Nearest store
Consumption calculator
Description
Usage

AKRISTOP concentrated moisture-insulating primer is intended for moisture insulation of porous mineral surfaces (plaster, concrete, bricks, wood fibre boards, plasterboard, etc.) before painting them with water-dispersion paints, finishing with ceramic tiles, puttying or wallpapering. Provides protection of the surface against the effects of moisture and improves the adhesion of finishing materials to the treated surface.

Prior to use, AKRISTOP is diluted with water depending on the type of surface and its porosity in the following ratios* (see Table 1). The product is applied with a paint brush or roller on clean surfaces in 1 to 2 coats. Air and surface temperature must be not lower than +5 °C; relative air humidity – not higher than 85%. The corners as well as the fixation points of plumbing fittings must be treated with special care. Consumption of working solution is 4 to 10 m²/l depending on the absorption capacity of the surface. Drying time: at 20 °C: 1 hour, at +5°C: 2 to 3 hours. Clean the work tools with warm water and soap. Store in a tightly closed container at a temperature above 0 °C.

Table 1

Surface

Dilution ratio
AKRISTOP, partsWater, parts
concrete, bricks14÷5
plasterboard13÷4
plaster12÷3
Need help?
info@www.rilak.ee
+371 67 458 776
Question about the product
Description

AKRISTOP concentrated moisture-insulating primer is intended for moisture insulation of porous mineral surfaces (plaster, concrete, bricks, wood fibre boards, plasterboard, etc.) before painting them with water-dispersion paints, finishing with ceramic tiles, puttying or wallpapering. Provides protection of the surface against the effects of moisture and improves the adhesion of finishing materials to the treated surface.

Usage

Prior to use, AKRISTOP is diluted with water depending on the type of surface and its porosity in the following ratios* (see Table 1). The product is applied with a paint brush or roller on clean surfaces in 1 to 2 coats. Air and surface temperature must be not lower than +5 °C; relative air humidity – not higher than 85%. The corners as well as the fixation points of plumbing fittings must be treated with special care. Consumption of working solution is 4 to 10 m²/l depending on the absorption capacity of the surface. Drying time: at 20 °C: 1 hour, at +5°C: 2 to 3 hours. Clean the work tools with warm water and soap. Store in a tightly closed container at a temperature above 0 °C.

Table 1

Surface

Dilution ratio
AKRISTOP, partsWater, parts
concrete, bricks14÷5
plasterboard13÷4
plaster12÷3
Question about the product
Patēriņa kalkulators

Contact us

We will be happy to help

Consumption calculator

Find out how much of the product You will need.

Produkts:
Consumption
AKRISTOP
4 m²/l
Surface area
Based on our calculations You will need approximately:
0
liters of product for one coating

SIA Rīgas laku un krāsu rūpnīca

Daugavgrīvas iela 63/65, Rīga, LV-1007

Reģistrācijas Nr.: 40003284444

PVN Nr.: LV40003284444

Banka: A/S Swedbank

Konts: LV23HABA0019308047593

Bankas kods: HABALV22

Contact us

We will be happy to help