Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

AURLAK M

Semi- matte quick-drying alkyd urethane varnish
For interior use
The product can be applied by roller
The product can be applied by brush
Use appropriate solvent for diluting and tools cleaning
Drying time 3 h
Packaging 0.9 l, 2.7 l, 10 l
Consumption 8 - 10 m²/l
Nearest store
Consumption calculator
Description
Usage

Quick-drying alkyd urethane varnish is intended for varnishing parquet floors indoors. It forms a solid glossy film with high water and abrasion resistance.

Stir the varnish before use. If necessary, dilute to working viscosity with white spirit or VAITSOL solvent. Use the same solvents to wash the work tools. The varnish is applied on clean, dry wooden surfaces with a roller or paint brush in 2 to 3 coats with a consumption (excluding losses during application) of 8 to 10 m2/l for each coat. Temperature of the air and surface to be varnished must be between +5 °C and +30 °C. The relative air humidity – not higher than 85%. When applying the first coat, dilute the varnish with solvent, 10% of volume. To apply the remaining coats, dilute the varnish as follows: 0 to 5% of the varnish volume. Light sanding is recommended between coats. Sanding is mandatory if the drying time between coats is longer than 48 hours. Drying time at 20 °C: 3 hours (at 10 °C: 6 hours). Recommended drying time before applying the next coat: from 8 to 48 hours. Coating reaches maximum hardness 5 days after application of the last coat. When working with varnish, it is necessary to ensure good air exchange and use protective equipment for the eyes, face and hand skin (goggles, gloves, etc.). The varnish should be stored in a tightly sealed container, protecting from warming.

Need help?
info@www.rilak.ee
+371 67 458 776
Question about the product
Description

Quick-drying alkyd urethane varnish is intended for varnishing parquet floors indoors. It forms a solid glossy film with high water and abrasion resistance.

Usage

Stir the varnish before use. If necessary, dilute to working viscosity with white spirit or VAITSOL solvent. Use the same solvents to wash the work tools. The varnish is applied on clean, dry wooden surfaces with a roller or paint brush in 2 to 3 coats with a consumption (excluding losses during application) of 8 to 10 m2/l for each coat. Temperature of the air and surface to be varnished must be between +5 °C and +30 °C. The relative air humidity – not higher than 85%. When applying the first coat, dilute the varnish with solvent, 10% of volume. To apply the remaining coats, dilute the varnish as follows: 0 to 5% of the varnish volume. Light sanding is recommended between coats. Sanding is mandatory if the drying time between coats is longer than 48 hours. Drying time at 20 °C: 3 hours (at 10 °C: 6 hours). Recommended drying time before applying the next coat: from 8 to 48 hours. Coating reaches maximum hardness 5 days after application of the last coat. When working with varnish, it is necessary to ensure good air exchange and use protective equipment for the eyes, face and hand skin (goggles, gloves, etc.). The varnish should be stored in a tightly sealed container, protecting from warming.

Question about the product
Patēriņa kalkulators

Contact us

We will be happy to help

Consumption calculator

Find out how much of the product You will need.

Produkts:
Consumption
AURLAK M
8 m²/l
Surface area
Based on our calculations You will need approximately:
0
liters of product for one coating

SIA Rīgas laku un krāsu rūpnīca

Daugavgrīvas iela 63/65, Rīga, LV-1007

Reģistrācijas Nr.: 40003284444

PVN Nr.: LV40003284444

Banka: A/S Swedbank

Konts: LV23HABA0019308047593

Bankas kods: HABALV22

Contact us

We will be happy to help