Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

LUOTEN

Glossy water-soluble furniture varnish
For interior use
The product can be applied by roller
The product can be applied by brush
The product can be applied with spray gun
Use water for diluting and tools cleaning
Drying time 2 h
Packaging 0.9 l, 2.7 l
Product can be stored only at temperatures above 5 ºC
Consumption 8 - 10 m²/l
Nearest store
Consumption calculator
Description
Usage

LUOTEN gloss water-soluble furniture varnish on an acrylate-polyurethane water dispersion base is intended for varnishing furniture, interior wooden parts and other wooden surfaces in interiors. Not suitable for varnishing wood products made of beech. Forms a hard coating, resistant to wear and periodic exposure to household cleaning products.

Stir the varnish thoroughly before use. The surface to be varnished must be clean, dry and free from sanding dust. It is recommended to use FURNICOLOR, FURNICOLOR PRO or TONTEKS wood stain before varnishing. Air and surface temperature must not be below +10 ºC. Air relative humidity must be not higher than 80%. Avoid direct sunlight and draught during varnish application. Application. Apply LUOTEN varnish with a spray gun or brush in 2–4 coats. Apply in even coats to prevent local build-up of varnish. Drying time between applications is not less than 3 hours. Consumption: 8–10 m²/l per coat. Drying time at 20 °C is 2 hours. Drying time until further treatment (sanding) of the product may be started is 3 hours. Use water to clean work tools. Dried varnish residue is removed with acetone or solvent 646. Store in a tightly closed container at a temperature not lower than +5 °C.

Need help?
info@www.rilak.ee
+371 67 458 776
Question about the product
Description

LUOTEN gloss water-soluble furniture varnish on an acrylate-polyurethane water dispersion base is intended for varnishing furniture, interior wooden parts and other wooden surfaces in interiors. Not suitable for varnishing wood products made of beech. Forms a hard coating, resistant to wear and periodic exposure to household cleaning products.

Usage

Stir the varnish thoroughly before use. The surface to be varnished must be clean, dry and free from sanding dust. It is recommended to use FURNICOLOR, FURNICOLOR PRO or TONTEKS wood stain before varnishing. Air and surface temperature must not be below +10 ºC. Air relative humidity must be not higher than 80%. Avoid direct sunlight and draught during varnish application. Application. Apply LUOTEN varnish with a spray gun or brush in 2–4 coats. Apply in even coats to prevent local build-up of varnish. Drying time between applications is not less than 3 hours. Consumption: 8–10 m²/l per coat. Drying time at 20 °C is 2 hours. Drying time until further treatment (sanding) of the product may be started is 3 hours. Use water to clean work tools. Dried varnish residue is removed with acetone or solvent 646. Store in a tightly closed container at a temperature not lower than +5 °C.

Question about the product
Patēriņa kalkulators

Contact us

We will be happy to help

Consumption calculator

Find out how much of the product You will need.

Produkts:
Consumption
LUOTEN
8 m²/l
Surface area
Based on our calculations You will need approximately:
0
liters of product for one coating

SIA Rīgas laku un krāsu rūpnīca

Daugavgrīvas iela 63/65, Rīga, LV-1007

Reģistrācijas Nr.: 40003284444

PVN Nr.: LV40003284444

Banka: A/S Swedbank

Konts: LV23HABA0019308047593

Bankas kods: HABALV22

Contact us

We will be happy to help