Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

RIATOP PRIMER

Quick-drying anti-corrosion alkyd primer
For interior use
For exterior use
The product can be applied by roller
The product can be applied by brush
The product can be applied with spray gun
The product can be tinted
Use appropriate solvent for diluting and tools cleaning
Drying time 1 h
Packaging 0.9 l, 2.7 l, 10 l (gray), 9.9 l (A base)
Consumption 12 m²/l (for one layer with a dry film thickness of 40 μm)
Nearest store
Consumption calculator
Tinting
Description
Usage

RIATOP PRIMER, a quick-drying anti-corrosion alkyd primer, is intended for priming steel surfaces exposed to atmospheric influence. Contains effective anti-corrosion pigments. Can be used indoors as a permanent, hard and wear-resistant coating. Produced in 2 shades – white (Base A) and grey. Base A can be used white or tinted in light shades. Alkyd and urethane alkyd enamels (RIATOP, PENTAPRIM, PENTATOP UNIVERSAL) are recommended as top coats after priming.

The paintable surface must be cleaned from rust and dirt, using the abrasive cleaning method, and degreased. The degree of purity of the surface to be achieved is Sa 2½ or St 3. Stir primer thoroughly before use. Dilute to working viscosity with xylene or SOLVEKS SPRINT solvent if necessary: 0–5% by volume when applied with a roller or brush. Application of primer by spraying is allowed only in painting facilities of industrial plants and workshops. The air and surface temperature during application must not be below +5 °C. Air relative humidity must not be higher than 85%. Apply the primer in 1–2 coats on a clean dry surface with a brush, roller, sprayer or airless spray equipment (with a nozzle diameter of 0.011″–0.017″). The drying and curing time until application of the next coats is shown in Table 1. Data on primer consumption for coatings of different thickness are given in Table 2.

Table 1

Air and paintable surface temperature

Drying time, hours

Curing time until application of the next RIATOP PRIMER as well as RIATOP enamel coats

Curing time until application of enamel PENTAPRIM, PENTATOP UNIVERSAL coats

hours,

not less than

hours,

not more than *

hours,

not less than

hours,

not more than

+10 °C

1.51.5121

There are no restrictions

+20 °C1161

There are no restrictions

* If the next coat of RIATOP primer or enamel has not been applied within the specified time after the first coat, it is only allowed to be applied 6 days after the previous coat.

Table 2

Primer coat thickness, μm

The number of coats required to achieve the specified thicknessPrimer consumption, m²/l, excluding losses during application
 

for dry film

for wet layer

(without dilution)

40

801

12

801601

6

Need help?
info@www.rilak.ee
+371 67 458 776
Question about the product
Description

RIATOP PRIMER, a quick-drying anti-corrosion alkyd primer, is intended for priming steel surfaces exposed to atmospheric influence. Contains effective anti-corrosion pigments. Can be used indoors as a permanent, hard and wear-resistant coating. Produced in 2 shades – white (Base A) and grey. Base A can be used white or tinted in light shades. Alkyd and urethane alkyd enamels (RIATOP, PENTAPRIM, PENTATOP UNIVERSAL) are recommended as top coats after priming.

Usage

The paintable surface must be cleaned from rust and dirt, using the abrasive cleaning method, and degreased. The degree of purity of the surface to be achieved is Sa 2½ or St 3. Stir primer thoroughly before use. Dilute to working viscosity with xylene or SOLVEKS SPRINT solvent if necessary: 0–5% by volume when applied with a roller or brush. Application of primer by spraying is allowed only in painting facilities of industrial plants and workshops. The air and surface temperature during application must not be below +5 °C. Air relative humidity must not be higher than 85%. Apply the primer in 1–2 coats on a clean dry surface with a brush, roller, sprayer or airless spray equipment (with a nozzle diameter of 0.011″–0.017″). The drying and curing time until application of the next coats is shown in Table 1. Data on primer consumption for coatings of different thickness are given in Table 2.

Table 1

Air and paintable surface temperature

Drying time, hours

Curing time until application of the next RIATOP PRIMER as well as RIATOP enamel coats

Curing time until application of enamel PENTAPRIM, PENTATOP UNIVERSAL coats

hours,

not less than

hours,

not more than *

hours,

not less than

hours,

not more than

+10 °C

1.51.5121

There are no restrictions

+20 °C1161

There are no restrictions

* If the next coat of RIATOP primer or enamel has not been applied within the specified time after the first coat, it is only allowed to be applied 6 days after the previous coat.

Table 2

Primer coat thickness, μm

The number of coats required to achieve the specified thicknessPrimer consumption, m²/l, excluding losses during application
 

for dry film

for wet layer

(without dilution)

40

801

12

801601

6

Question about the product
Patēriņa kalkulators

Contact us

We will be happy to help

Consumption calculator

Find out how much of the product You will need.

Produkts:
Consumption
RIATOP PRIMER
12 m²/l
Surface area
Based on our calculations You will need approximately:
0
liters of product for one coating

SIA Rīgas laku un krāsu rūpnīca

Daugavgrīvas iela 63/65, Rīga, LV-1007

Reģistrācijas Nr.: 40003284444

PVN Nr.: LV40003284444

Banka: A/S Swedbank

Konts: LV23HABA0019308047593

Bankas kods: HABALV22

Contact us

We will be happy to help