Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

SAMAN

Decorative plaster
For interior use
The product can be tinted
Use water for diluting and tools cleaning
Drying time 24 h
Packaging 5 kg
Product can be stored only at temperatures above 5 ºC
Consumption 1.0 - 1.2 m²/l
Nearest store
Consumption calculator
Tinting
Description
Usage
Related products
Video

Decorative plaster rendering calm ambience of country  side in urban environments of residential flat or office. It forms structure replicating surface of „chopped straw” rustic adobe wall of old traditional house. Eyecatching thick multilevel structure variegated with play of various patterns creates comfortable ambience calling to relaxation from urban bustle at the end of hectic day. SAMAN forms soundproofing elastic crackbridging coat capable to mask various surface imperfections and requires just minimal surface preparation.

Prior to plastering surface has to be coated by KVARC primer. Recreating of relief structure. SAMAN has to be applied by rectangular or trapezoidal trowel in criss-cross or wavy  manner keeping light pressure on to the tool. Too rough areas can subsequently be smoothened by brush. Application can be conducted at air and surface temperature above +10 oC and relative humidity below 85%.Drying time of  SAMAN at +20оС – 24-36 h  depending on relief thickness . Spreading rate: 1,0-1,2 m2/kg. Developing of structure by means of application of tinted CERA wax. CERA has to be evenly applied by brush or woollen glove on to 1¸2 m2 surface area unit using multidirectional or circular movements . While CERA is still wet surface has to be worked by woollen glove again in order to ensure uniform wax spreading all over the surface. In case high degree of washability is required it is recommended to seal the surface by transparent varnish of required degree of gloss (Ekoakva, Luoten or Paneļu laka can be used). Varnishing of surface helps also to reveal contrast of the structure. In case pearlescent sparkling effect is desired it is also possible (optional) to admix pearlescent powder PERLIUM of required colour directly to the lacquer prior to its application. Painting tools after work has been completed can be cleaned off by warm water with soap. Paint has to be stored at tightly closed pails at temperature above +5 oC.

How to apply decorative plaster SAMAN
Need help?
info@www.rilak.ee
+371 67 458 776
Question about the product
Description

Decorative plaster rendering calm ambience of country  side in urban environments of residential flat or office. It forms structure replicating surface of „chopped straw” rustic adobe wall of old traditional house. Eyecatching thick multilevel structure variegated with play of various patterns creates comfortable ambience calling to relaxation from urban bustle at the end of hectic day. SAMAN forms soundproofing elastic crackbridging coat capable to mask various surface imperfections and requires just minimal surface preparation.

Usage

Prior to plastering surface has to be coated by KVARC primer. Recreating of relief structure. SAMAN has to be applied by rectangular or trapezoidal trowel in criss-cross or wavy  manner keeping light pressure on to the tool. Too rough areas can subsequently be smoothened by brush. Application can be conducted at air and surface temperature above +10 oC and relative humidity below 85%.Drying time of  SAMAN at +20оС – 24-36 h  depending on relief thickness . Spreading rate: 1,0-1,2 m2/kg. Developing of structure by means of application of tinted CERA wax. CERA has to be evenly applied by brush or woollen glove on to 1¸2 m2 surface area unit using multidirectional or circular movements . While CERA is still wet surface has to be worked by woollen glove again in order to ensure uniform wax spreading all over the surface. In case high degree of washability is required it is recommended to seal the surface by transparent varnish of required degree of gloss (Ekoakva, Luoten or Paneļu laka can be used). Varnishing of surface helps also to reveal contrast of the structure. In case pearlescent sparkling effect is desired it is also possible (optional) to admix pearlescent powder PERLIUM of required colour directly to the lacquer prior to its application. Painting tools after work has been completed can be cleaned off by warm water with soap. Paint has to be stored at tightly closed pails at temperature above +5 oC.

Related products
Video
How to apply decorative plaster SAMAN
Question about the product
Patēriņa kalkulators

Useful advice

Contact us

We will be happy to help

Consumption calculator

Find out how much of the product You will need.

Produkts:
Consumption
SAMAN
1.0 m²/l
Surface area
Based on our calculations You will need approximately:
0
liters of product for one coating

SIA Rīgas laku un krāsu rūpnīca

Daugavgrīvas iela 63/65, Rīga, LV-1007

Reģistrācijas Nr.: 40003284444

PVN Nr.: LV40003284444

Banka: A/S Swedbank

Konts: LV23HABA0019308047593

Bankas kods: HABALV22

Contact us

We will be happy to help