Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

TEKSTURDEKOR BASE

Impregnating primer for wooden surfaces
For interior use
For exterior use
The product can be applied by brush
Use appropriate solvent for diluting and tools cleaning
Drying time 8 h
Packaging 0.9 l, 2.7 l, 10 l
Consumption on non-planed surfaces 4 - 7 m²/l
Consumption on planed surfaces 9 - 11 m²/l
Nearest store
Consumption calculator
Description
Usage

Impregnating agent for priming indoor and outdoor wooden surfaces before painting. It is well absorbed into the pores of wood, protecting the surface from water absorption; improves the weather resistance of the coating. Recommended for priming surfaces before painting with water-based paints and solvent-based enamels intended for painting wooden surfaces.

The product is ready to use and does not need to be diluted. Stir before use and apply with a brush on a clean dry wooden surface in 1–2 coats, rubbing thoroughly along the wood fibres. Board ends should be treated with special care. Before high-quality finish that gives highly decorative appearance, for example, before varnishing a raised grain wooden surface, light sanding of the surface with fine sandpaper is permitted. The air and surface temperature should be above +5 ºC during application and drying. The air relative humidity must not exceed 85%. Drying time at 20±2 °C is not more than 8 hours. Consumption when painting planed surfaces is 9–11 m²/l per coat; when painting untreated surfaces – 4–7 m²/l per coat. Wash used painting tools with white spirit or solvent VAITSOL. It is recommended to use up all of the product.

Need help?
info@www.rilak.ee
+371 67 458 776
Question about the product
Description

Impregnating agent for priming indoor and outdoor wooden surfaces before painting. It is well absorbed into the pores of wood, protecting the surface from water absorption; improves the weather resistance of the coating. Recommended for priming surfaces before painting with water-based paints and solvent-based enamels intended for painting wooden surfaces.

Usage

The product is ready to use and does not need to be diluted. Stir before use and apply with a brush on a clean dry wooden surface in 1–2 coats, rubbing thoroughly along the wood fibres. Board ends should be treated with special care. Before high-quality finish that gives highly decorative appearance, for example, before varnishing a raised grain wooden surface, light sanding of the surface with fine sandpaper is permitted. The air and surface temperature should be above +5 ºC during application and drying. The air relative humidity must not exceed 85%. Drying time at 20±2 °C is not more than 8 hours. Consumption when painting planed surfaces is 9–11 m²/l per coat; when painting untreated surfaces – 4–7 m²/l per coat. Wash used painting tools with white spirit or solvent VAITSOL. It is recommended to use up all of the product.

Question about the product
Patēriņa kalkulators

Contact us

We will be happy to help

Consumption calculator

Find out how much of the product You will need.

Consumption
Surface area
Based on our calculations You will need approximately:
0
liters of product for one coating

SIA Rīgas laku un krāsu rūpnīca

Daugavgrīvas iela 63/65, Rīga, LV-1007

Reģistrācijas Nr.: 40003284444

PVN Nr.: LV40003284444

Banka: A/S Swedbank

Konts: LV23HABA0019308047593

Bankas kods: HABALV22

Contact us

We will be happy to help