Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

VERSAKRIL

Weather-resistant water-based acrylate varnish for outdoors and indoors
For interior use
For exterior use
The product can be applied by roller
The product can be applied by brush
The product can be applied with spray gun
The product can be tinted
Use water for diluting and tools cleaning
Drying time 3 h
Packaging 0.9 l, 2.7 l, 9 l
Product can be stored only at temperatures above 5 ºC
Consumption 6 - 7 m²/l
Nearest store
Consumption calculator
Tinting
Description
Usage

Water-based acrylate varnish is intended for varnishing wooden surfaces indoors and outdoors. Can be used for covering wooden windows, garden furniture, etc. Forms a semi-matte, semi-translucent film with high resistance of coated surfaces against sticking. The inherent UV filter provides long-term protection of the wood surface and the coating itself against ultraviolet solar radiation. In cases where the wood surface to be varnished needs to be tinted while increasing the weather resistance of the coating, VERSAKRIL can be tinted in the RILAKOLOR system according to the COLTEC WOOD (EC base) catalogue.

Surface preparation. VERSAKRIL may only be applied to clean, dry and dust-free wooden surfaces. Outdoor wood surfaces should be primed with one coat of TEKSTURDEKORS AKVASATIN colourless or tinted paint. VERSAKRIL may be applied on top of TEKSTURDEKORS AKVASATIN only after the latter has dried completely. Priming is not required for indoor wood surfaces. Stir VERSAKRIL thoroughly before use. Dilution to the working viscosity with water (up to 10–20% when applied with a spray gun; 0–5% when applied with a brush) is permitted if necessary. The air and paintable surface temperature must not be lower than +10 ºC. Air relative humidity – not higher than 70%. Apply VERSAKRIL with a brush or spray in 2 coats. Varnish should be applied evenly, preventing local accumulation and formation of a thicker coat. Consumption is 6–7 m²/l per coat. Drying time between applications: not less than 1 hour at 20±2 ºC or not less than 3 hours at 10±2 ºC.  Drying time at 20±2 °C: does not stick in 45 minutes, dries completely (subsequent treatment permitted) in 3 hours. Water is also used to clean work tools. Dried VERSAKRIL residue can be removed with acetone or solvent 646. Store in a tightly closed container at a temperature not lower than +5 °C.

Need help?
info@www.rilak.ee
+371 67 458 776
Question about the product
Description

Water-based acrylate varnish is intended for varnishing wooden surfaces indoors and outdoors. Can be used for covering wooden windows, garden furniture, etc. Forms a semi-matte, semi-translucent film with high resistance of coated surfaces against sticking. The inherent UV filter provides long-term protection of the wood surface and the coating itself against ultraviolet solar radiation. In cases where the wood surface to be varnished needs to be tinted while increasing the weather resistance of the coating, VERSAKRIL can be tinted in the RILAKOLOR system according to the COLTEC WOOD (EC base) catalogue.

Usage

Surface preparation. VERSAKRIL may only be applied to clean, dry and dust-free wooden surfaces. Outdoor wood surfaces should be primed with one coat of TEKSTURDEKORS AKVASATIN colourless or tinted paint. VERSAKRIL may be applied on top of TEKSTURDEKORS AKVASATIN only after the latter has dried completely. Priming is not required for indoor wood surfaces. Stir VERSAKRIL thoroughly before use. Dilution to the working viscosity with water (up to 10–20% when applied with a spray gun; 0–5% when applied with a brush) is permitted if necessary. The air and paintable surface temperature must not be lower than +10 ºC. Air relative humidity – not higher than 70%. Apply VERSAKRIL with a brush or spray in 2 coats. Varnish should be applied evenly, preventing local accumulation and formation of a thicker coat. Consumption is 6–7 m²/l per coat. Drying time between applications: not less than 1 hour at 20±2 ºC or not less than 3 hours at 10±2 ºC.  Drying time at 20±2 °C: does not stick in 45 minutes, dries completely (subsequent treatment permitted) in 3 hours. Water is also used to clean work tools. Dried VERSAKRIL residue can be removed with acetone or solvent 646. Store in a tightly closed container at a temperature not lower than +5 °C.

Question about the product
Patēriņa kalkulators

Contact us

We will be happy to help

Consumption calculator

Find out how much of the product You will need.

Produkts:
Consumption
VERSAKRIL
6 m²/l
Surface area
Based on our calculations You will need approximately:
0
liters of product for one coating

SIA Rīgas laku un krāsu rūpnīca

Daugavgrīvas iela 63/65, Rīga, LV-1007

Reģistrācijas Nr.: 40003284444

PVN Nr.: LV40003284444

Banka: A/S Swedbank

Konts: LV23HABA0019308047593

Bankas kods: HABALV22

Contact us

We will be happy to help